Category: Natural science

2 course questions

Please do 2 questions as below 825 words for each according to the lecture PPT as uploaded

1.
Visualization is an important topic in cartographic design. Its effectiveness is dependent on the appropriate use of graphics in symbolization. Discuss.

2.
Scale, resolution and generalization are three important concepts in the field of cartography. Discuss their interrelationships and considerations under different contexts.

(might need to find content from the web for resolution)

Atmospheric Forces and Wind

Formulate an organized, clearly worded, and succinct initial post that substantively covers all discussion points stated for your chosen topic. Because your initial post will be scored on the degree to which you meet these standards, there is no set minimum word requirement. However, there is a set maximum word requirement confine your initial post to 500 words. Remember that we are all reading each others posts, and one that is succinctly written is more likely to be read and responded to, thus furthering our discussion on that topic.
Include at least one graphic, video, or image that visually adds to some aspect of your post – as they say, pictures are worth 1000 words!

magine yourself a local, state or federal politician who needs to find a way to reconcile the immediate needs for cheap energy for the long term need to preserve the climate

In your final project proposal (as well as in the final project), imagine yourself a local, state or federal politician who needs to find a way to reconcile the immediate needs for cheap energy for the long term need to preserve the climate. The goal is to increase energy production from renewable sources either without raising taxes and/or fees, and not derailing the local/state/country economy by higher energy prices; or clearly explaining and obtaining the public support for increased taxation and/or energy costs for the course. Please, think of your own plan how you would do it. Be bold; think outside the box, dont be afraid to propose revolutionary ideas: everything will work for the scope of the final project. Please evaluate your proposal based upon: 1) its cost to implement, 2) political and economic factors supporting or prohibiting its success, 3) calculations of anticipated carbon emission reductions, 4) public acceptance, and 5) whether it is replicable at other levels of government.

Efficiency and Adaption

Slide1 : Mutualism
Find an example of mutualism and describe the relationship between the two organisms. Give three examples (three points that cover the benefits and at least one drawback) to describe the benefits and potential limitations of the relationship (remember from your Case assignment, even mutually beneficial relationships can have drawbacks as noted with the monkeys and wolves). Show an image to illustrate the relationship.

Slide 2: Commensalism
Find an example of commensalism and describe the relationship between the two organisms. Give three examples to describe the benefits and limitations of the relationship. Show an image to illustrate the relationship.

Slide 3: Parasitism
Find an example of parasitism and describe the relationship between the two organisms. Give three examples to describe the benefits and limitations of the relationship. Show an image to illustrate the relationship.

Slides 4-5 Exploring Ecosystems
Watch the following video:
Exploring Ecosystems: Coral Reef Symbiosis | California Academy of Sciences
https://www.youtube.com/watch?v=-EUUEPinEcQ

slide 6 Describe two examples of mutualistic relationships found on the coral reef in the video. Be sure to describe how each organism benefits in the relationship. Provide images illustrating the relationships. How do these interactions influence patterns of distribution and abundance within this ecosystem as a whole?

Slide 7: Conclusion
Summarize your project findings.

Slide 8: References
APA Format

Efficiency and Adaption

Part I

In Module 1 you were first introduced to communities. Organisms within communities interact primarily through the following ways: competition, predation, and symbiosis. Read about the unusual relationship documented between Ethiopian wolves and Gelada monkeys at the website below or read about the symbiotic relationship between badgers and coyotes. Chose only one of the articles below to answer Part I using the following questions:

Luntz, S. (2015). Symbiotic partnership between monkeys and wolves discovered. Accessed on IFL Science on August 16, 2016, at http://www.iflscience.com/plants-and-animals/monkey-wolf-symbiosis/
or

Haemig, P. D. (2012). Badger-coyote associations. Ecology. Info 11. Retrieved from http://www.ecology.info/badger-coyote.htm
What type of relationship is found between the Gelada monkeys and Ethiopian wolves or badgers and coyotes?
What are the short-term and long-term benefits for each species you read about in the article you selected?
What are some of the costs for each of the species as a result of their mutual relationship?
Do you think their relationship could change if resources became scarce? Why or why not?
Part II

Now consider the benefits and costs to businesses in the marketplace: Choose one of the following businesses that are now extinct: Circuit City, Pan Am, or Tower Records. Address the following questions in Part II of your assignment:

What were some of the long-run costs associated with operating the business?
Who were their competitors?
What were the factors that contributed to the decision to shut down the business?
Do you think your chosen company could have been successful by adopting a mutually beneficial partnership, similar to organisms in the wild? Why or why not?

Organize this essay assignment using subtitles that summarize the topic from each question above. For example, to answer Question 1, use a descriptive subtitle like the following: Part I: Symbiotic Relationship Between Coyotes and Badgers

Geography

There are 2 parts for this assignment.
First part, I want you to comment about what you enjoyed (or didn’t understand about the reading) from Lopez-Aguado Chapter 4.pdf.

Second part,
I want you to comment about what you enjoyed (or didn’t understand about the reading) from Appel-Hannah-THE-POWER-OF-DEBT.pdf, & There Is Power in a Debtors’ Union”. points!

For both part, you don’t need to mention all readings  but i want you to be subjective. your response should be based on your opinion.

I want you to spare the equal amount for both parts.
I’ve attached the examples so i want you to follow the structure.

Renewable Energy Needs Improvement Before We See Effective Results

the essay needs to be a lit review. I have a lot of information gathered and partly written the essay. it needs 4 sources and needs to be in APA format. it mainly needs citations and some reworking. you can restart from scratch if needed or use the essay below. I have attached a sample essay which is how it’s supposed to look. if you decide to start over, please use the same research topic.

Ayanaav Mull

Ritsumeikan University

Global Studies Major / Academic Skills II 

Mrs. Kunshiac Claudia

December 2nd 2020

Renewable Energy Needs Improvement Before We See Effective Results

Introduction

The issue of climate change has been the subject of much controversy over the recent decade. The questions that constantly arise from these debates is: Are conventional energy sources such as fossil and nuclear fuels worse than so-called “renewable” energy sources, and should humanity do a 100% switch?  Of course, these questions will not be answered overnight, but hypothetically, should the possibility of switching everything even be considered? Analyzing the costs and effects of using reusable energy either completely or partially as a substitute for finite energy sources can help people understand the necessary conditions to create these changes and whether the cost is even worth it. What are renewable energy sources anyway? Renewable energy sources are energies that are naturally replenished on a human timescale; energies that are always available and having an unlimited reserve. For example: the wind, the sun, and the ethanol for Hydraulic and geothermal energy can all be used to produce electricity, but because of the limited possibilities of use alternatives, it may represent only a minuscule part of the total alternatives actually possible in future time. Wind and solar energy also have the perception of not producing carbon dioxide during operation, but because of its low efficiency during manufacturing, it actually releases more than one would think. So we can cross wind and solar energy off the list because it’s beyond feasible. A good definition of “feasible” would be: Able to work or function; it is good enough to replace conventional energy sources. Good enough to be an alternative source, and therefore independent of each other. As of now, it seems like it’s not possible, but maybe it can be realized at a later stage.

Four Vital Factors to take into Consideration

In the book “Power Hungry,” Robert Bryce mentions four vital energy sources that work in the commerce space: energy density, cost, scalability, and power density. Power density is how dense or spread out power generating systems use different energy sources are. Nuclear and fossil fuel power plants are generally compact, while wind and solar power plants are usually large. Researchers found that power densities can vary by as much as 1000 times, with biomass the lowest (at 0.8 W/m2) and natural gas the highest (at 1000 W/m2). Solar and wind power needs around 40-50 times more space than coal and 90-100 times more space than gas. These calculations play a major role when determining a viable renewable energy source. Not only calculations of resources needed, but more importantly, the cost of transitioning to 100-Percent Renewable Energy. There are several studies that indicate it would cost the world trillions of dollars to transition to an electric system that is 100-percent renewable. Even if the world was somehow able to scrape that cash and invest in renewable energies, not every establishment will be able to adapt this new technology. This is when scalability comes into play. Scalability determines whether an energy source can be efficiently scaled up to a proper size or percentage of the energy sector. For example, hydroelectricity and geothermal meet most needs, but only a few sites are suitable for this type of energy, so their scalability is limited. In addition to the four imperatives listed above, a fifth imperative must be added: reliability. If you cannot rely on a source of electricity to produce power when you need it, it is unacceptable to be a significant player. Many have high hopes for energies such as wind and solar, but it’s best to only have a pessimistic perspective as these new technologies can have devastating effects on the world. Take wind and solar for example. Wind only has usable energy when it blows within an acceptable range; and solar energy only produces electricity when the sun is shining and only when the sky is clear and the sun is in its ideal position at full power.

Why Cost May be Even More Important Than Other Factors

As a country, we have to evaluate all energy sources for electricity production on the basis of costs. It is difficult to establish a precise basis because of the many technological variants, position, dimensions of the systems, etc. However, some costs of different projects can show a relative comparison between different energy production technologies. Some developed countries have introduced measures to restrict fossil fuels. Consumption through a mix of carbon taxes, charges or regulations (in the case of the European Union, certain American states, Japan, Canada, and Australia), subsidies for energy saving (in the United States and other countries) and development the use of low or zero-carbon energy sources (in the US and elsewhere). In these and other countries, the data from the annual statistical review of public relations show that consumption of oil and coal has fallen by around 10%, while natural gas consumption (which has lower carbon emissions) increased by 10% from levels in 2005. In addition, Smith says, “Compared to conventional electrical power generation costs, renewable technologies are always more expensive. Wind is 40-100% more costly, and solar is higher than conventional sources by a factor of 3 to 10 times.” which further accentuates this point.   

Ungovernable Factors of Renewable Resources

It is obvious that due to the variability of wind and sun, renewable energy power plants cannot be considered as a continuous source of electricity. Currently, renewable energy relies on the support of fuel-burning sources to provide a proper source of electricity and reliable power to meet the needs of the grid as an alternative source of electricity to replace fossil fuels and nuclear energy. Only renewable energy must be able to provide reliable energy regardless of the energy sources it is intended to replace. Alone, electricity from renewable energies must have energy mode batteries that can be activated when needed when the wind blows in addition to the energy needed to recharge these devices when the wind blows in case of an emergency. There are conceptual alternatives to electricity storage, including energy from pump water, flow batteries, flywheels, and compressed air, but these reserve energy storage facilities would require significant expenditure for construction and maintenance, in addition to the cost of wind/solar energy generation plants. Being able to supply electricity to the grid-like wind and sunlight power sources, and making sure that extra electricity is available to charge the battery for later use, and enforcing the development of production capacity to multiply the demand, is too high for a single contribution. Jones further states that, “Unfortunately, the problem of promoting environmental perceptions that are not consistent with the legal reality goes beyond individual solar companies’ deceptive actions. When actual policies are examined, even some state leaders who proclaim renewable energy leadership have participated in these practices.” The solar wave has also caused an increase in solar energy nationwide. In a comment in the LA Times, Severin Borenstein, professor of economics and public sector at UC Berkeley policy, has outlined this growing national problem: “If you’ve installed solar panels on your roof and feel aglow with environmental virtue, you may be in for a rude awakening. The solar community is often affected by an effective marketing campaign to become “solar” by registering with a third party.

Why Sustainability is Poor and Why Investments Are Not Constant

In the past, whenever the price of fossil fuel fell for various reasons including economic recession, there was a sharp reduction in renewable energy investment and Research and Development (R&D) budget along with a drop in decisions to adopt new policies to promote renewable energy (Bhattacharya, 2010) On September 27, 2016, the Ontario Ministry of Energy suspended the planned second round of the Large Renewable Procurement (LRP II) process and the Energy-from-Waste Standard Offer Program. This decision halted the procurement of over 1,000 MW of electricity from solar, wind, hydroelectric, bioenergy and energy-from-waste projects. According to the Ministry of Energy (2016), the decision to suspend planned electricity procurement from renewable sources was informed by the IESOs Ontario Planning Outlook, an independent technical report on the electricity system in Ontario, requested by the minister of energy in June 2016. In the IESOs report, various planning scenarios for the future of Ontarios energy system over 20 years were outlined, presenting the Ministry of Energy with options for decision making. The IESO concluded in its report that Ontario had an adequate supply of electricity to meet demand over the coming years. (Oji, C., & Weber, O. 2017).

Conclusion

Although the majority of this essay focuses on the renewable energies of wind and solar, variants of these two primary replacements are even less viable. There is an undeniable role in maintaining energy to further allow the development of civilization. In modern society, it is challenging to find one reliable resource that is low cost, reliable, and harmless to the environment. There have been many times during the existence of human civilization that a traditional energy source was changed. Not because the old source was exhausted, but because there are more sophisticated and efficient ways to carry out the same processes. In a pursuit to improve the lives of others, many may fail to consider the consequences of such deeds and acts. The story of energy remains infinite until we develop methods that are effective and safe. But until then, we can only accept the fact that there are no simple solutions, only intelligent choices.

Citations:

Oji, C., & Weber, O. (2017). Advancing Sustainable Energy in Ontario: The Case of Regional Renewable Energy Cooperatives (pp. 9-10, Rep.). C. Hurst and; Company. Retrieved December 2, 2020, from http://www.jstor.org/stable/resrep15529.13

Bhattacharya, A. (2010). (Rep.). Institute for Global Environmental Strategies. Retrieved December 3, 2020, from http://www.jstor.org/stable/resrep00734

Nuclear Reactor – Understanding how it works | Physics Elearnin

video link = https://youtu.be/1U6Nzcv9Vws

Watch the short  video on nuclear reactors.  Submit 1) an outline of the video presentation and 2) show two balanced nuclear equations which occur in the nuclear fission reactor.  This assignment is worth 100 points.

How to write an outline

An outline presents a picture of the main ideas and the subsidiary ideas of a subject. Some typical uses of outlining might be an essay, a term paper, a book review, or a speech. For any of these, an outline will show a basic overview and important details. It’s a good idea to make an outline for yourself even if it isn’t required by your professor, as the process can help put your ideas in order.

Some professors will have specific requirements, like requiring the outline to be in sentence form or have a “Discussion” section. A students first responsibility, of course, is to follow the requirements of the particular assignment. What follows illustrates only the basics of outlining.

Basic outline form
The main ideas take Roman numerals (I, II, …) and should be in all-caps. Sub-points under each main idea take capital letters (A, B, …) and are indented. Sub-points under the capital letters, if any, take Arabic numerals (1, 2, …) and are further indented. Sub-points under the numerals, if any, take lowercase letters (a, b, …) and are even further indented.

MAIN IDEA
Subsidiary idea or supporting idea to I
Subsidiary idea or supporting idea to I
Subsidiary idea to B
Subsidiary idea to B
Subsidiary idea to 2
Subsidiary idea to 2
MAIN IDEA
Subsidiary or supporting idea to II
Subsidiary idea to II
Subsidiary idea to II
MAIN IDEA

It is up to the writer to decide on how many main ideas and supporting ideas adequately describe the subject. However, traditional form dictates that if there is a I in the outline, there has to be a II; if there is an A, there has to be a B; and so forth.

Outline example
Suppose you are outlining a speech about gerrymandering, and these are some of the ideas you feel should be included: voter discrimination, “majority-minority” districts, the history of the term, and several Supreme Court cases.

To put these ideas into outline form, decide first on the main encompassing ideas. These might be: I. History of the term, II. Redistricting process, III. Racial aspects, IV. Current events.

Next, decide where the rest of the important ideas fit in. Are they part of the redistricting process, or do they belong under racial aspects? The complete outline might look like this:

Gerrymandering in the U.S.

HISTORY OF THE TERM
REDISTRICTING PROCESS
Responsibility of state legislatures
Census data
Preclearance
Partisan approaches
RACIAL ASPECTS
Gomillion v. Lightfoot (1960)
Civil rights
Voter discrimination
Voting Rights Act (1965)
Majority-minority districts
CURRENT EVENTS
Effects of gerrymandering in 2012 and 2016 elections
Gill v. Whitford Supreme Court Case

It is only possible to make an outline if you have familiarity with the subject. As you do research, you may find it necessary to add, subtract or change the position of various ideas. If you change your outline, ensure that logical relationship among ideas is preserved.

Further reading
Tardiff, E., and Brizee, A. (2013). Developing an outline. In Purdue OWL. Look at all three sections. The third includes an example.

Lester, J.D., and Lester, Jr., J.D. (2010). Writing research papers: A complete guide (13th ed.). New York: Longman. Includes several models, including for a general-purpose academic paper.

Turabian, K.L. (2013). A Manual for Writers of Research Papers, Theses, and Dissertations. Chicago: University of Chicago Press.

microbiology report

Brief Introduction: State the purpose of your investigation. A Maximum of Three (3) sentences for the introduction should be good.

Materials: State materials you used in investigating your unknown organism. A couple of sentences.

Method: Describe the steps you used in identifying your Unknown I. You can paraphrase the me steps in the lab manual. Maximum of one paragraph.

Results: Describe the morphological characteristics of your organism, and state the gram status of your organism (This should be what you reported on your grams report sheet). Include pictures of results in submission. At most three (3) sentences.

Discussion:

State the purpose of each step of the test (for instance, you added the crystal violet for bacteria which thicker peptidoglycan to pick the stain).

Compare your results to the expected results (based on my feedback on your grams report)

Explain what may have accounted for any differences between your results and the expected results, if applicable.

Draw a conclusion on your unknown 1.

One (1 or 2) paragraphs for this section.

References:

Cite any references you used. Your lab manual should be included. Use the APA referencing style.

Microbiology report

Brief Introduction: State the purpose of your investigation. A Maximum of Three (3) sentences for the introduction should be good.

Materials: State materials you used in investigating your unknown organism. A couple of sentences.

Method: Describe the steps you used in identifying your Unknown I. You can paraphrase the me steps in the lab manual. Maximum of one paragraph.

Results: Describe the morphological characteristics of your organism, and state the gram status of your organism (This should be what you reported on your grams report sheet). Include pictures of results in submission. At most three (3) sentences.

Discussion:

State the purpose of each step of the test (for instance, you added the crystal violet for bacteria which thicker peptidoglycan to pick the stain).

Compare your results to the expected results (based on my feedback on your grams report)

Explain what may have accounted for any differences between your results and the expected results, if applicable.

Draw a conclusion on your unknown 1.

One (1 or 2) paragraphs for this section.

References:

Cite any references you used. Your lab manual should be included. Use the APA referencing style.